![imatge de NorbertB imatge de NorbertB](https://platform.labdoo.org/sites/default/files/styles/thumbnail/public/pictures/picture-6889-1718293143.jpg?itok=DlxwZ1VN)
Equip/s:
Hi, today I got a Lenovo ThinkPad with a nvme SSD inside.
Labtix shows this device as nvme0n1 to me.
If installer ask me for boot device, I tried "nvme0n1", "/dev/nvme0n1" but nothing works.
Everytime I get an error message "Target disk does not exist in the image..."
What can I do?
Comentaris
Hi Norbert,
Hi Norbert,
as you describe it, you used Labtix and installer correct. In installer sda is pre-set, but above sda and nvme0n1 is shown. Remove sda and type nvme0n1 (Enter), should work. Sometimes creating a new partition table and partition might help.
Later you get an orange text (hint, not error), just press enter. It is not an error, only shown because the images are generated on an sda-drive, but now you want to re-store it on an nvme0n1-drive.
If you need more assistance, let me know.
Ralf,
Labdoo.org (Germany)
You are right, that was the
You are right, that was the messagen I've seen.
Everything is working now :)