Installation on nvme0n1

×

狀態訊息

You are not a member of this team. If you want to be part of this team, click on 'Subscribe to this team'.
NorbertB's 的頭像
由 NorbertB 在 週一, 06/10/2024 - 17:47 發表
團隊: 
Labdoo Global Support (LGS)

Hi, today I got a Lenovo ThinkPad with a nvme SSD inside.
Labtix shows this device as nvme0n1 to me.
If installer ask me for boot device, I tried "nvme0n1", "/dev/nvme0n1" but nothing works.
Everytime I get an error message "Target disk does not exist in the image..."

What can I do?

回應

Rhein-Ruhr-Hub's 的頭像
由 Rhein-Ruhr-Hub 在 週一, 06/10/2024 - 17:55 發表

Hi Norbert,
as you describe it, you used Labtix and installer correct. In installer sda is pre-set, but above sda and nvme0n1 is shown. Remove sda and type nvme0n1 (Enter), should work. Sometimes creating a new partition table and partition might help.
Later you get an orange text (hint, not error), just press enter. It is not an error, only shown because the images are generated on an sda-drive, but now you want to re-store it on an nvme0n1-drive.
If you need more assistance, let me know.
Ralf,
Labdoo.org (Germany)